*Subject to Justrite store Terms & Conditions
To help provide a high standard of service for our customers, we would like to confirm our operating and supplying arrangements for the Christmas closure season.
Please click here for more details
Principle
Once the roof trusses and rafters have been assembled the metal fascia is then installed, ready for the gutter to be added. The rafter brackets have been specially designed to aid quick assembly, with slots for both horizontal and vertical adjustment, as well as holes for screwing to timber and metal rafters. It is not necessary to cut the end of the rafters.
Recommended Fasteners
Brackets to timber rafters: no. 6 x 25 bugle head type 17 self drilling screws. For steel 10 x 16 teks minimum 3 fasteners per bracket are required.
Fascia
Work on each straight run in turn.
Fascia Cover is used to cover old timber fascia and is simply placed over the timber fascia and fixed with a pan head screw at each rafter. The same accessories as for barge and can be used to finish off.
Steeline Metal Fascia is installed exactly level and the height and distance from the wall can be adjusted so that standard width soffit lining can be used without any trimming. The groove in the rear of the metal fascia is used to retain the outer edge of the soffit lining, and thus there is no trim piece required.
Install barge in a similar manner to fascia, except the brackets are bent at right angles along the line of slots. In this case, all brackets are fixed on and the barge sprung on last. Methods of fixing barge are as follows.
Cut both ends of the barge at an angle to suit the pitch of the roof. A barge mitre is used to finish the joint between the barge and the fascia. At the roof apex, the 2 barge lengths are joined by leaving a flange on one which inserts into the other and is secured by blind rivets.
Joining Sleeves
Slide one end of the internal joining sleeve into one length and then slide the second length over the other end. The external joining sleeve is then used to cover the join.
Fascia Corners
The internal mitre and internal mitre angle are used to form internal corner joints and are fixed with blind rivets. External corners can also be made using the external mitre. Alternatively, mitre the length of fascia/barge, bend to 90o and secure with blind rivets. MAXIMUM SUPPORT SPACINGS (NON-CYCLONIC)
Metal fascia shall be supported by a bracket at every rafter, or at a maximum of 1200mm between brackets.
NOTE: FOR CYCLONIC REGIONS REFER TO YOUR LOCAL MANUFACTURER
Manufactured from 0.42 BMT G550 or 0.55 BMT G300
A Standard Rafter Bracket
B Internal Mitre
C Internal Mitre Angle
D Internal Joining Sleeve
E External Joining Sleeve
F External Mitre
This product doesn't have any reviews yet.
Delivery costs:
Freights for Postcode :
Usual Delivery Time (in working days):
Normally take 2-3 days to deliver in metropolitan areas. Delivery time will depend on your location and availability of stock.
Is pick up available?
No, order Pickup NOT available
The availability and price of products might differ depending upon your location. To check the availability, simply enter your postcode after clicking on the product.
You can expect delivery in 3-4 business days
Yes, all the prices on JustRite store website are inclusive of GST.
We are based in Canberra, and our installation services are only available in ACT region.
Unfortunately, we are unable to do so. The courier services generally do not offer such a service.
We prefer our customers to use either Google Chrome or Mozilla Firefox to process orders through our website. The Microsoft Internet Explorer (versions prior to 9.0) does not support the security certificates that are installed on our website to ensure a secure transaction processing. However, any versions of Internet Explorer from version 9.0 onwards can support our website.Â
We only guarantee 48 hours turn over. But most likely if you order before 10 am, there are chances of delivering the following day based on previous delivery experience.
Deliveries normally take 2-3 working days in metropolitan areas. Delivery time will depend on your location and availability of stock. We are unable to offer an exact time of delivery as goods are normally delivered by couriers. The courier company will not call to advise you of ETA (Estimated Time of Arrival). We only estimate the day of delivery and this estimate is based on the latest information available to us by the supplier/freight company. We will not be liable for any cost or damages caused by this information if the product does not arrive on the date provided by the supplier/freight company. It is the buyer's responsibility to have someone available to receive the goods. If there is no one to accept the goods the courier company will leave the goods at your doorstep and we do not take any responsibility for the stock after that. Please use the tracking system to find the EDD (Estimated Day of Delivery)