Over Fascia Vent 10mm G1200N

PROCTOR VENT OVER FASCIA VENTS

The ProctorVent Over Fascia Vent are the most practical and cost efficient method of ventilating the eaves. They are easy to install, discrete and are compatible with either timber or metal fascias. Over Fascia Vents are the only method of achieving eaves ventilation to buildings with no eaves or soffit. 

The FV10 & FV25 ProctorVent Over Fascia Vents are designed to discreetly ensure airflow into the roof space between the roof membrane and the fascia board of 10,000mm2 and 25,000mm2 per linear metre respectively. These products are ideal for both new build and re-roofing situations.

The application of either the FV10 or FV25 will depend on the pitch and design of roof construction. The FV10 & FV25 are designed with evenly spaced openings specifically sized to prohibit large insects gaining access but wide enough to prevent capillary action.

The FV10 & FV25 must to be used in conjunction with other specified ProctorVent products, such as RR650, if unimpeded ventilation through the roof cavity is to be achieved. A minimum 20mm gap between the bottom roof batten and the over fascia vent must be realised for air flow into the roof cavity.