Please Note: Displayed pricing is currently NSW. To avoid errors, please ensure you enter your delivery postcode prior to placing products in the cart [close]
Loading
Loading....
Steeline Fascia Board (0.42 BMT*) ST01 image
×

Steeline Fascia Board (0.42 BMT*) ST01

PRODUCT CODE: Fascia ST01
BRAND: Steeline
Availability:

Not Available in your area

Tags:

Installation

Principle

Once the roof trusses and rafters have been assembled the metal fascia is then installed, ready for the gutter to be added. The rafter brackets have been specially designed to aid quick assembly, with slots for both horizontal and vertical adjustment, as well as holes for screwing to timber and metal rafters. It is not necessary to cut the end of the rafters.

Recommended Fasteners

Brackets to timber rafters: no. 6 x 25 bugle head type 17 self drilling screws. For steel 10 x 16 teks minimum 3 fasteners per bracket are required.

Procedure

Fascia
Work on each straight run in turn.

  1. Mark the position of the brackets on the two end rafters. 
    Note: The top of the fascia should be located as follows: metal roofs - 2mm (min) below the roof sheeting. Tile roofs 35 to 65mm above the top corner of the rafter.
  2. Run a stringline between the two end rafters on the vertical line. (String not to touch other rafters).
  3. Mark vertical lines on the other rafters using a bevel set at the roof pitch.
  4. Fix 2 rafter brackets to the end rafters on the marked lines.
  5. Run a stringline between these brackets attaching at the soffit groove on each.
  6. Add intermediate brackets, sufficient to support the fascia. These must be on the vertical lines and the stringline.
  7. Cut the length of fascia on the ground. Prepare mitres and splices if required.
  8. Lift the prepared length of fascia up to the brackets, hook the bottom onto the brackets, and spring the top over the top of the brackets.
  9. Add the remaining brackets. Twist the brackets into the back of the fascia, slide along and hold against rafter. Screw to the rafter, ensuring the fascia is straight and the front face is vertical.

Fixing Fascia Cover

Fascia Cover is used to cover old timber fascia and is simply placed over the timber fascia and fixed with a pan head screw at each rafter. The same accessories as for barge and can be used to finish off.

Soffit Application

Steeline Metal Fascia is installed exactly level and the height and distance from the wall can be adjusted so that standard width soffit lining can be used without any trimming. The groove in the rear of the metal fascia is used to retain the outer edge of the soffit lining, and thus there is no trim piece required.

Barge

Install barge in a similar manner to fascia, except the brackets are bent at right angles along the line of slots. In this case, all brackets are fixed on and the barge sprung on last. Methods of fixing barge are as follows.

Cut both ends of the barge at an angle to suit the pitch of the roof. A barge mitre is used to finish the joint between the barge and the fascia. At the roof apex, the 2 barge lengths are joined by leaving a flange on one which inserts into the other and is secured by blind rivets.

Fitting Accessories

Joining Sleeves 
Slide one end of the internal joining sleeve into one length and then slide the second length over the other end. The external joining sleeve is then used to cover the join.

Fascia Corners 
The internal mitre and internal mitre angle are used to form internal corner joints and are fixed with blind rivets. External corners can also be made using the external mitre. Alternatively, mitre the length of fascia/barge, bend to 90o and secure with blind rivets. MAXIMUM SUPPORT SPACINGS (NON-CYCLONIC) 
Metal fascia shall be supported by a bracket at every rafter, or at a maximum of 1200mm between brackets. 
NOTE: FOR CYCLONIC REGIONS REFER TO YOUR LOCAL MANUFACTURER

Thickness

Manufactured from 0.42 BMT G550 or 0.55 BMT G300

Accessories

A Standard Rafter Bracket 
B Internal Mitre 
C Internal Mitre Angle 
D Internal Joining Sleeve 
E External Joining Sleeve 
F External Mitre

Review This Product

Thank you for review this product.


This product doesn't have any reviews yet.

Delivery costs:

Shipping to this postal code () is Price On Application (POA)

Freight cost to this postcode will be on request. Please add this product and quantity to the shopping cart and fill the freight request form. We will return with a response within as soon as possible.

If you are planning to continue shopping more products please continue until you load all the products to the cart. Once you load all the products go to checkout and press Request Freight button to receive Freight cost.

Is pick up available?

No, order Pickup NOT available

Frequently Asked Questions(FAQ)

  • Can you confirm the order will be delivered tomorrow?

    We only guarantee 48 hours turn over. But most likely if you order before 10 am, there are chances of delivering the following day based on previous delivery experience.

    We only guarantee 48 hours turn over. But most likely 
    if you order before 10am, there are chances of delivering the following day
    based on previous delivery experience.We only guarantee 48 hours turn over. But most likely if you order before 10 am, there are chances of delivering the following day based on previous delivery experience.
  • I'm using Internet Explorer to use your website and I wish to place an order but it is not allowing me to do so. Why?

    We prefer our customers to use either Google Chrome or Mozilla Firefox to process orders through our website. The Microsoft Internet Explorer (versions prior to 9.0) does not support the security certificates that are installed on our website to ensure a secure transaction processing. However, any versions of Internet Explorer from version 9.0 onwards can support our website. 

    We prefer our customers to use either Google Chrome or
    Mozilla Firefox to process orders through our website. The Microsoft Internet Explorer (versions prior to 9.0) does not support the security certificates that are installed on our website to ensure a secure transaction processing. However, any versions of Internet Explorer from
    version 9.0 onwards can support our website. 
  • Will it be possible to receive a call from courier company to confirm delivery?

    Unfortunately, we are unable to do so. The courier services generally do not offer such a service.

  • Do you provide installation service?

    We are based in Canberra, and our installation services are only available in ACT region.

  • Are the prices on the website inclusive of GST?

    Yes, all the prices on JustRite store website are inclusive of GST.

  • Just made an order and wondering how long delivery would take?

    You can expect delivery in 3-4 business days

  • Why are products showing "not available" when I click on them?

    The availability and price of products might differ depending upon your location. To check the availability, simply enter your postcode after clicking on the product.

  • How long the delivery does takes?

    Deliveries normally take 2-3 working days in metropolitan areas. Delivery time will depend on your location and availability of stock. We are unable to offer an exact time of delivery as goods are normally delivered by couriers. The courier company will not call to advise you of ETA (Estimated Time of Arrival). We only estimate the day of delivery and this estimate is based on the latest information available to us by the supplier/freight company. We will not be liable for any cost or damages caused by this information if the product does not arrive on the date provided by the supplier/freight company. It is the buyer's responsibility to have someone available to receive the goods. If there is no one to accept the goods the courier company will leave the goods at your doorstep and we do not take any responsibility for the stock after that. Please use the tracking system to find the EDD (Estimated Day of Delivery)

    Deliveries normally take 2-3 working days in metropolitan areas.
    Delivery time will depend on your location and availability
    of stock. We are unable to offer an exact time of delivery as
    goods are normally delivered by couriers. The courier company
    will not call to advise you of ETA (Estimated Time of Arrival). We only estimate the day of delivery and this estimate is based on the latest information available to us by the supplier/freight company. We will not be liable for any cost or damages caused by this information if the product
    does not arrive on the date provided by the supplier/freight
    company. It is the buyer's responsibility to have someone
    available to receive the goods. If there is no one to accept
    the goods the courier company will leave the goods at your
    doorstep and we do not take any responsibility for the stock
    after that. Please use the tracking system to find the EDD
    (Estimated Day of Delivery)
4.7
303 reviews since joining Google Customer Reviews